Six phases make
one working cell.
Follow the same two-cup moulding from the detailed mould, onto its ejector pins, into the robot tooling and onto the conveyor. Scrub the hand-off to inspect each contact.
Start exploringThe connected production cell.
From clamp closing to conveyor.
12 narrated chapters · about 5 minutes · pause and inspect any part
Explore the component guide.
The 3D view could not start on this device. All component explanations, diagrams and sources remain available below.
Scrub the cycle to inspect a precise position.
The same two-cavity mould is mounted between the platens.
Timing turns equipment into a process.
Step through a qualitative cycle. Time is normalised; real operations overlap and depend on the process and machine.
Condition before processing.
Drying, conveying and dosing solve different problems on the way to the feed throat.
Make the hand-off.
Robot axes position the tool. The end-of-arm tooling grips the part and confirms pickup.
Keep heat moving.
The temperature controller circulates fluid; the chiller removes heat from the circuit.
What happens when you change a variable?
Try the engineering labs. Estimate clamping force, explore cooling time, and connect cycle time to output—with the assumptions in view.